- 您现在的位置：买卖IC网 > Sheet目录315 > BD6088GUL-E2 (Rohm Semiconductor)IC LED DRIVER BKLT 36VCSP50L3
BD6088GUL
Technical Note
● Notes for use
(1) Absolute Maximum Ratings
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can
break down devices, thus making impossible to identify breaking mode such as a short circuit or an open circuit. If any
special mode exceeding the absolute maximum ratings is assumed, consideration should be given to take physical safety
measures including the use of fuses, etc.
(2) Power supply and ground line
Design PCB pattern to provide low impedance for the wiring between the power supply and the ground lines. Pay
attention to the interference by common impedance of layout pattern when there are plural power supplies and ground
lines. Especially, when there are ground pattern for small signal and ground pattern for large current included the external
circuits, please separate each ground pattern. Furthermore, for all power supply pins to ICs, mount a capacitor between
the power supply and the ground pin. At the same time, in order to use a capacitor, thoroughly check to be sure the
characteristics of the capacitor to be used present no problem including the occurrence of capacity dropout at a low
temperature, thus determining the constant.
(3) Ground voltage
Make setting of the potential of the ground pin so that it will be maintained at the minimum in any operating state.
Furthermore, check to be sure no pins are at a potential lower than the ground voltage including an actual electric transient.
(4) Short circuit between pins and erroneous mounting
In order to mount ICs on a set PCB, pay thorough attention to the direction and offset of the ICs. Erroneous mounting can
break down the ICs. Furthermore, if a short circuit occurs due to foreign matters entering between pins or between the
pin and the power supply or the ground pin, the ICs can break down.
(5) Operation in strong electromagnetic field
Be noted that using ICs in the strong electromagnetic field can malfunction them.
(6) Input pins
In terms of the construction of IC, parasitic elements are inevitably formed in relation to potential. The operation of the
parasitic element can cause interference with circuit operation, thus resulting in a malfunction and then breakdown of the
input pin. Therefore, pay thorough attention not to handle the input pins, such as to apply to the input pins a voltage lower
than the ground respectively, so that any parasitic element will operate. Furthermore, do not apply a voltage to the input
pins when no power supply voltage is applied to the IC. In addition, even if the power supply voltage is applied, apply to
the input pins a voltage lower than the power supply voltage or within the guaranteed value of electrical characteristics.
(7) External capacitor
In order to use a ceramic capacitor as the external capacitor, determine the constant with consideration given to a
degradation in the nominal capacitance due to DC bias and changes in the capacitance due to temperature, etc.
(8) Thermal shutdown circuit (TSD)
This LSI builds in a thermal shutdown (TSD) circuit. When junction temperatures become detection temperature or higher,
the thermal shutdown circuit operates and turns a switch OFF. The thermal shutdown circuit, which is aimed at isolating
the LSI from thermal runaway as much as possible, is not aimed at the protection or guarantee of the LSI. Therefore, do
not continuously use the LSI with this circuit operating or use the LSI assuming its operation.
(9) Thermal design
Perform thermal design in which there are adequate margins by taking into account the permissible dissipation (Pd) in
actual states of use.
(10) LDO
Use each output of LDO by the independence. Don’t use under the condition that each output is short-circuited because it
has the possibility that an operation becomes unstable.
(11) About the pin for the test, the un-use pin
Prevent a problem from being in the pin for the test and the un-use pin under the state of actual use. Please refer to a
function manual and an application notebook. And, as for the pin that doesn't specially have an explanation, ask our
company person in charge.
(12) About the rush current
For ICs with more than one power supply, it is possible that rush current may flow instantaneously due to the internal
powering sequence and delays. Therefore, give special consideration to power coupling capacitance, power wiring, width
of ground wiring, and routing of wiring.
(13) About the function description or application note or more.
The function description and the application notebook are the design materials to design a set. So, the contents of the
materials aren't always guaranteed. Please design application by having fully examination and evaluation include the
external elements.
www.rohm.com
? 2011 ROHM Co., Ltd. All rights reserved.
49/51
2011.04 - Rev.A
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
BD6142AMUV-E2
IC LED DRIVER SGL STEP UP 24QFN
BD6581GU-E2
IC LED DVR WHT BCKLGHT VCSP85H2
BD6583MUV-AE2
IC LED DRIVER WHIT BCKLGT 24VQFN
BD6586MUV-E2
IC LED DRVR WHITE BCKLGT 24-VQFN
BD6592MUV-E2
IC LED DRVR WHITE BCKLGT 24-VQFN
BD7844AEFV-E2
IC LED DISPLAY DVR 5V 28-HTSSOP
BD8105FV-E2
IC LED DVR SERIAL PAR 20-SSOP
BD8112EFV-ME2
IC LED DRIVER 24-VSSOP
相关代理商/技术参数
BD60910GU
制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit
BD60910GU_11
制造商:ROHM 制造商全称:Rohm 功能描述:White backlight LED Drivers for Small to Medium LCD Panels (Switching Regulator Type)
BD60910GU-E2
制造商:ROHM Semiconductor 功能描述:IC;MULTI BACLIGHT LED DRIV; VCSPH3 PKG - Tape and Reel 制造商:ROHM Semiconductor 功能描述:IC LED DRIVER W/DIM VCSP85H3 制造商:ROHM Semiconductor 功能描述:IC LED DRIVER MULTI BACKLIGHT
BD6091GU
制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit
BD6091GU_11
制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit
BD6092GU
制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit
BD60-940
制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Phase Full-Wave Bridge Rectifie
BD6095GU
制造商:ROHM 制造商全称:Rohm 功能描述:Mulitifunction Backlight LED Driver for Small LCD Panels (Charge Pump Type)